The difference between LED lamp and energy saving lamp
Introduction: the life of LED lights, LED lights than ordinary lamps and lanterns consume less electricity, with the LED lights home every month out of the electricity bill is much less, for the protection of the environment there are important about, under the circumstances of multi-kill LED lights more and more popular. But you also need to know that LED lights, like people, have a life, if the use of LED lights beyond its life, then its energy saving ability will be greatly reduced or no longer have the effect of energy saving. So, how long is the service life of LED lamp? Let’s talk about the difference between LED lamp and energy-saving lamp.
How long does the LED lamp last？
The theory is a 30000h-50000h(semiconductor diode).
1. How long is the service life of LED lamp and chip packaging (different environment will affect life. And how low the bulb to the case is impossible, this is a standard)
2. How long is the service life of LED lights and power drive power supply (generally 2 years for electronic products)
3. How long is the service life of LED lamp, lamps and lanterns? The whole life is a long time, generally 2-3 years.
The difference between led lamp and energy-saving lamp？
The difference between led lamp and energy-saving lamp is that the life of general led lamp can be used for more than 50000 hours, and the life of some special led lamps can reach 100000 hours. Of course, there are chip and driver factors that determine the life of LED lamps. However, the life of LED lamps is much longer than that of other lamps because LED lamps do not have filament fuse.
And the life of general energy-saving lamp is in 5000 hours or so, also have to reach 8000 hours above, namely a year or so energy-saving lamp needs to be replaced.
By comparison, we can see that the LED lamp can be used for more than five years before it needs to be replaced, which greatly saves the cost of replacing the bulb in terms of service time.
What is led energy saving lamp？
LED energy-saving lamp is a new generation of lighting source after compact fluorescent lamp.
An LED, or semiconductor light-emitting diode, is a solid-state semiconductor device that converts electricity directly into light. LED energy-saving lamp is a high-brightness white light-emitting diode light source, high light efficiency, less power consumption, long life, easy to control, maintenance-free, safe and environmental protection; Is a new generation of solid cold light source, light color soft, gorgeous, rich and colorful, low loss, low energy consumption, green environmental protection, suitable for families, shopping malls, Banks, hospitals, hotels, hotels and other kinds of public field lighting. No flash dc, good protection for eyes, is the best choice of lamp, flashlight.
The heart of a light-emitting diode, or LED, is a chip of a semiconductor that attaches one end to a bracket, one end to a negative pole, and the other end to a positive pole of the power supply, so that the whole chip is encapsulated in an epoxy resin. A semiconductor chip consists of two parts: a p-type semiconductor, in which the hole dominates, and an n-type semiconductor, in which the electrons dominate. But when the two semiconductors are connected, they form a p-n junction. When an electric current is applied to the chip through a wire, the electrons are pushed into the p-block, where they recombine with holes and emit energy in the form of photons, which is how leds glow. Because LED lamp calorific value is not high, convert electric energy into light energy as far as possible, and ordinary lamp because calorific value is big convert a lot of electric energy into thermal energy, waste in vain. LED lighting, by contrast, is energy efficient.
As a category of LED general lighting, LED energy-saving lamp derives its name from the traditional lighting bulb lamp and energy-saving lamp. The appearance of LED energy-saving lamps is similar to that of traditional energy-saving lamps, which can satisfy consumers’ traditional aesthetic standards. LED energy-saving lamp features: low cost, high light efficiency, large luminous area, no glare, no ghosting.